Smarty Touch Tuner 6.7 Cummins with ComMod

Smarty Touch Tuner 6.7 Cummins with ComMod ( 2013 - 2018 )

On sale: ~~$1,208.95~~ $1,074.00

Part Number: Smarty-Touch-ComMod

NOTE: We do not ship Smarty to California

Holiday Sale - SAVE Today !

Lowest Price - Purchase Here !

FREE Shipping !

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description

MADS Electronics Smarty Touch Tuner Programmer with ComMod

Vehicle Application:

1998.5 - 2007 Dodge Ram Pickup Trucks Cummins 5.9 L
2007 - 2010 Dodge Ram Pickup Trucks Cummins 6.7 L
2011 - 2012 RAM Pickup Trucks Cummins 6.7 L
2013 - 2018 RAM Pickup Trucks Cummins 6.7 L (Requires Smarty ComMod Communication Module)

NOTE: Cab and Chassis: 2007-2018 Cummins 6.7 Cab and Chassis with pickup type ECM
The Smarty product we Sell only Works with DPF Installed and EGR Installed and all emissions in place. If you have deleted anything on your truck emissions - This Product will not work !

Smarty Touch VIN License:

The Smarty Touch works off licenses. The Smarty Touch includes a single license which is good for 1 truck/ECM. After being used on the first truck, a new license will need to be purchased for each truck and/or ECM that you would like to install the tuner onto. Licenses are $150 each. You can have up to 3 additional licenses installed, for a total of 4 licenses on 1 device. These different licenses can be used at the same time one does not have to go back to stock first before using on another truck, so it is now possible to tune up to four different trucks at the same time with a single Smarty Touch.
The Smarty Touch needs to be plugged into the OBDII port of the truck to program or change levels but then can be unplugged. You can choose to leave the Smarty Touch plugged in and mounted if you would like to use it for gauges.

Smarty Communication Module:

The Smarty Communication Module ( ComMod ) is an additional Bus Expansion port for the Smarty Touch. The Smarty Communication module (optional) tunes real time parameters. The Smarty Communication module is required to tune an ECM for CR 6.7L 2013-2018 trucks.

Smarty Pyrokit EGT Sensor Kit:

The Smarty Thermocouple EGT ( Exhaust Gas Temperature ) Sensor Kit (S2GEGT) gives the Smarty Touch monitor the ability to read and display your exhaust gas temperatures. The Smarty EGT sensor (optional) reads accurately up to over 2200°F.

Cummins Truck Transmission Swap:

This Smarty Touch can be used to update the Cummins Truck/ECM for a transmission swap (Manual to Automatic) or (Automatic to Manual). The Cummins Truck must be a supported truck model for this Smarty Touch. The Smarty recovery file is required and can be purchased for $150. To request the Smarty recovery file, please EMAIL the Smarty Manufacturer dedicated North American tech support at: [email protected]

Smarty Touch features:

Includes free suction cup mount to glass
4.3" Touch Display. Resolution 480 x 272 - 16.3 million colors.
Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics & user interface and the controller for communicating with the ECM.
Twin CPU design. The fastest Display & Tuner on earth!
Fastest display start up in the industry. Just four seconds! Fastest PID refresh speed in the industry.
Fastest ECM download in the industry, up to three times faster than the competition, a typical ECM update takes 1.5 to 6 minutes, depending on the model year.
Small micro USB cable connecting the display and the controller for easy installation.
MicroSD card for simple and fast updates (included).
Fully Internet updateable. Updates are always FREE!
MicroSD card can store multiple UDC custom tunes.
Works with any MicroSD FAT file system formatted card.

EGT sensor (optional). Reads accurately up to over 2200°F.
Communication module (optional). Tunes real time parameters and unlocks the MY 2013+ ECMs.
UDC Pro RT software (optional). Customizing tune software with real time parameters. (Requires Communication module for real time parameters programming). Please visit the Smarty Manufacturer site at MadsElectronics.com for more information.

Four dashboards, each configurable with five different gauge layouts.
Freely configurable gauge(s) range.
Two alarms (high and a low range) can be configured for each PID.
Audible and/or visible alarms can be configured.
Configured ranges are also displayed through colored bars in all digital gauges.
Configurable PID refresh speed.
Each gauge stores/updates and displays the max reached PID value continuously. Recorded max values can be reset at any time.
Customizable display background.
Adjustable sound feedback for alarms.
Supports over 300 SAE and Proprietary PID's. For a detailed list of the supported PID's (depending on MY), please visit Smarty Manufacturer website at: https://www.madselectronics.com/SmartyTouchPIDS.html

CaTCHER software inside with ten power levels. Selectable performance parameters for fine tuning.
Works with Smarty UDC and UDC Pro RT (Firmware 1.1.2 or recent is required) custom tuning software (for CR 5.9L and for 6.7L trucks).
Can store multiple UDC and UDC Pro RT custom softwares on MicroSD card with dongle purchases. The only limit is the storage space on the MicroSD card (for CR 5.9L trucks and 6.7L trucks).
ABS tire height updates in just seconds.
Cold weather 3 Cylinder High Idle enabled for 1998.5 - 2002 VP 5.9L trucks.
Not traceable in the stock setting. Smarty Touch leaves no footprint in all 5.9L trucks.
Manual High Idle is enabled in all softwares for CR 5.9L trucks (excluded MY 2003).
Reads Diagnostic Trouble Codes in plain text.
Clears DTC's.
Reliable, it works off your OEM hardware.
Programmable Speed Limiter from 25 to 250 mph.
Power Level Switch with 5 selectable levels.
Power on Demand "PoD" for CR 5.9L and 2007 - 2009 6.7L trucks.
Real time tuning parameters, while engine is running, for CR 6.7L 2010+ trucks (Requires Communication module).
Works on all Dodge Cummins Ram Pickup's from 1998.5 to 2018. Communication module required to tune an ECM for CR 6.7L 2013+ trucks.

1998.5 - 2002 Dodge Cummins 5.9 L - Fast guide to Smarty's software levels:

SW# 0 : Half power
SW # 1 : Fuel Saver
SW # 2 : Only more fuel and Boost fooling
SW # 3 : Like # 2 + added timing
SW # 4 : "Soft" CaTCHER no added timing
SW # 5 : Like # 4 + added Timing
SW # 6 : Mild CaTCHER no added timing
SW # 7 : Like # 6 + added Timing
SW # 8 : CaTCHER no added timing
SW # 9 : CaTCHER with Timing

Software number Zero - About half the power of a stock software. Use it whenever reduced power is desired or when you have to make sure that NO SMOKE is produced.
Software number One - The Fuel Saver software. Mpg gains vary, in most cases a + 2 MPG has been reported. Please notice that the timing in this software is rather aggressive. HEAVY TOWING is not recommended with this software.
Software number Two - This software increases the fuel delivered by the ECM and does the boost fooling.
Software number Three - Same as software # 2 but timing has been added.
CaTCHER softwares from number Four to number Nine - The even numbered softwares are identical to the odd numbered ones, except for the timing. The softwares without added timing are intended for use with timing adding boxes.
The power gain at top RPM with these softwares is almost identical. These softwares differ greatly in HOW they get there. Than higher the software number then more aggressive the throttle response from idle speed up. Aggressive to the point that the softwares Eight and Nine can become difficult to handle on slippery roads. Please be very careful when you use these softwares for the first time! It takes some time to learn how to handle them.

2003 - 2007 Dodge Cummins 5.9 L - Fast guide to Smarty's software levels:

SW # 0 : Half power
SW # 1 : 30 HP increase, with added timing
SW # 2 : 60 HP increase, no added timing
SW # 3 : 60 HP increase, with added timing
SW # 4 : 90 HP increase, no added timing
SW # 5 : 90 HP increase, with added timing
SW # 6 : 160 HP increase, no added timing
SW # 7 : 160 HP increase, with added timing
SW # 8 : 210 HP increase, no added timing
SW # 9 : 210 HP increase, with added timing

The horsepower settings, except #0, all other softwares have a modified "Torque management" (TQM). The throttle response is greatly improved but is set to a safe limit. With "Safe" Smarty means safe for your tranny and rest of the driveline.
Tested on stock trucks on Dyno Dinamics Twin Retarder Dyno. Stock means just that. Stock! Even the air filters were stock.
The trucks were S T O C K, even the wastegate settings! Smarty checked the "baseline" (the stock truck hp at the rear wheels) twice in a day in order to be sure about Smarty findings. The above declared hp numbers are all rounded down to the closest number. For example the 90 hp file actually did 96 hp. That's a 90 hp software for Smarty, not a 100. The 210 hp was 215.
Power on Demand - 100 power levels selectable in just one second during the driving! It's easy: just type the preferred power level directly on Smarty keyboard, from 00 to 99. That's all! For security reason, the truck waits that the throttle is released before applying the new power level.
No trace is left in the ECM! - SmartyCR is the FIRST AND ONLY downloader that does not erase any of the stored data in the ECM. Smarty does NOT leave any electronic footprints in the ECM or any other electronic module in the truck. Smarty does NOT set ANY codes once the ECM is set back to stock. Smarty does NOT need to have fuses pulled. No matter what the competition claims, in one way or another they're ALL detectable. Smarty is NOT! Yet, Smarty can not do one thing for you. Fix what others have broken. Smarty can not restore a key on counter that another downloader has erased. Smarty can not fix VIN# troubles caused by other products. If your Check engine / ABS light is on because another product has screwed your ECM, Smarty can not fix it, the other guy HAS to.
ABS / Speedo recalibration - The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.
DTC Code reader - The name says it all. You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. (Smarty does erase ABS codes too but does not display them)
ECM update speed - Faster than anything else on the market! Again Smarty has done its homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.
Smarty has developed its own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.

2007 - 2018 Dodge / RAM Cummins 6.7 L - Fast guide to Smarty's software levels:

SW # 0 : Half power
SW # 1 : 30 HP increase, with added timing
SW # 2 : 60 HP increase, no added timing ***
SW # 3 : 60 HP increase, with added timing
SW # 4 : 90 HP increase, no added timing ***
SW # 5 : 90 HP increase, with added timing
SW # 6 : 130 HP increase, no added timing ***
SW # 7 : 130 HP increase, with added timing
SW # 8 : 170 HP increase, no added timing *** °°°
SW # 9 : 170 HP increase, with added timing °°°

°°° Do not use for prolonged high speed runs! Speeds exceeding approx 105 MPH can result in high exhaust gas temperatures and damage the Diesel Particulate Filter (DPF)!!!
*** All even numbered softwares (2-4-6-8) without timing are to be used for stacking with other after market power adding devices that also add their own timing. NO additional timing has to be used with the odd numbered softwares (1-3-5-7-9).
Severe engine damage will result!!!
The horsepower settings, except #0, all other softwares have a modified "Torque management" (TQM). The throttle response is greatly improved but is set to a safe limit. With "Safe" Smarty means safe for your tranny and rest of the driveline.
Tested on stock trucks on Dyno Dinamics Twin Retarder Dyno. Stock means just that. Stock! Even the air filters were stock.
Smarty checked the "baseline" (the stock truck hp at the rear wheels) twice in a day in order to be sure about Smarty findings. The above declared hp numbers are all rounded down to the closest number. For example the 90 hp file actually did 96 hp. That's a 90 hp software for Smarty, not a 100. The 170 hp was 176.
ABS / Speedo recalibration - The tire height can be adjusted up to 44" in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.
DTC Code reader - The name says it all. You can read and erase codes. Codes are displayed also in plain English. That's old news by now. Smarty S-03 was the first one to provide that utility, others found the idea to be a good one too. (Smarty does erase ABS codes too but does not display them)
ECM update speed - Faster than anything else on the market! Again Smarty has done its homework on the protocol. Less than 5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.
Smarty has developed its own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it's own.

Smarty Tuner Warranty and Information:

Smarty warranty is 1 year.
For information including Warranty, Disclaimer of liability, User Guide, Software, and More, please visit Smarty Manufacturer website at: https://www.madselectronics.com/DownloadTouch.html
Note: The Smarty product we Sell only Works with DPF Installed and EGR Installed and all emissions in place. If you have deleted anything on your truck emissions - This Product will not work !
Smarty products are not legal for use in the State of California. Note: We do not ship Smarty to California.
Note: Installed products are not returnable. If the seal is broken, open-box item, then the Smarty Tuner is not returnable.

Smarty Tuner 5.9 Cummins ( 1998.5 - 2002 ) - S03

~~$695.00~~ $645.00 Sale

Add To Cart

Smarty Tuner 5.9 Cummins ( 2003 - 2007 ) - S06

~~$739.00~~ $685.00 Sale

Add To Cart

Smarty Thermocouple EGT ( Exhaust Gas Temperature ) Sensor Kit - S2GEGT

~~$169.00~~ $158.00 Sale

Add To Cart

Smarty Tuner 6.7 Cummins ( 2007 - 2012 ) - S67

~~$739.00~~ $685.00 Sale

Add To Cart

Smarty Touch Tuner 6.7 Cummins with ComMod ( 2013 - 2018 )

Holiday Sale - SAVE Today !

Related Items